Converters
Protocol Converter
RS232 To Can Converter
Fully compatible with ISO 11898-3 standard (low speed fault tolerance) (for I-7530-FT); Support various baud rate from 10K bps to 1Mbps; Jumper for 120 terminator resistor (for I-7530).
Can Bus Converter
CAN Transceiver NXP 82C250NXPTJA1042NXP TJA1042NXP 82C250NXP 82C250AMIS 41682; Baud Rate (bps)10k ~ 1M bps; 10k ~ 1M bps; Terminator Resistor Built-in 120Ω; Built-in 120Ω.
10/100M Managed Ethernet Media Converter
MDI/MDI-X auto negotiation, 10M/100M auto negotiation; Supports full /half duplex, Point-to-point transparent transfer; The module can be inserted into 2U 19", 17 slots Rackmount.
CAN to 2 100M Ethernet Fiber Ports
Support 2 100Base-FX Ethernet fiber ports; 5kbps~1000kbps line-speed non-blocking communication; Multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto
RS485/422 to Fiber Optic Converter
Extend RS-485/422 transmission up to 120 Km with single-mode; Transmit asynchronously, point to point, speed reach 500 Kbps; 600W surge protection, 15KV ESD protection.
Can Bus To Fiber Optic Converter
The fiber length between two I-2532s can be up to 1.4km (4593ft), it is mainly decided by the cable attenuation of fiber and the CAN bus baud. Compatible with CAN specification 2.0A and 2.0B.
Modbus Gateway for Industrial
Modbus TCP, Modbus RTU,Modbus ASCII, IP, ARP, DHCP and DNS protocol, 1 Port RS-485/422, 300 bps~115200 bps baud rate and nonblocking communication.
Profibus To Rs-232/422/485 Converter
Protocol & Hierarchy: DP-VO Slave; Supports PROFIBUS Transmission Rate(Kbps): 9.6,19.2,45.45,93.75,187.5,500,1500,3000,6000,12000; Transmission RateSetting: deleced automatically.
RS232/485/422 to Fiber Converter
Our offered product is widely used in various commercial and residential sectors. The entire range is designed using pristine-grade basic material and leading-edge technology.
USB To Can Converter
It is an isolated CAN repeater that can be used to establish a physical coupling of two segments of a CAN bus system. Tree topologies can be implemented as well as long drop lines using the I-7531.
RS232 RS485 To Ethernet Modbus Serial Converter
USR-TCP232-410S is a dual serial server, which supports rs232 & rs485 working at the same time. It is based on Cortex-M4 solution & the internal of the serial server integrates TCP/IP protocol stack.
RS-485 To Modbus Ethernet Converter
Standard: 10Base-T, 100Base-TX; Protocol: TCP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS; Rate: 10/100M automatic flow control, MDI/MDI-X auto tunning; Interface form: RJ45; Duplex mode: full/half duplex mode self-adaption
CAN-Bus To Ethernet Converter
2 CAN to 1 10/100 Base-T(X) self-adaptive Ethernet interface; Multiple operating modes like TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast; 5K~1000Kbps arbitrary baud rate; Wide operating temperature range
Modbus Converter
Modbus RTU To CAN Converter
RoHS Design; Fully compatible with ISO 11898-2 standard; Programmable CAN bus baud rate from 10 kbps to 1 Mbps or user-defined baud rate; Support Can bus acceptance filter configuration; Support firmware update via RS-232.
RS-232 To Ethernet Modbus Converter
There anyone who loves or pursues desires to obtain pain of itself.
RS-485/422 2-Port To Ethernet Modbus
Except to obtain some advantage from it? But who has any right to find fault.
Serial to Modbus Converter
There anyone who loves or pursues desires to obtain pain of itself.
4-Port RS-485/422 To Ethernet Modbus Converter
Except to obtain some advantage from it? But who has any right to find fault.
GW1108 - 8 RS-232/485/422 Modbus Gateway
Teachings of the great explorer of the truth, builder of human happiness.
RS485/232 To Ethernet Converter NP-301
Teachings of the great explorer of the truth, builder of human happiness.